Today, I wanted to write about and highlight a set of rock stacks that have been in my collection for some time. They are supposed to represent natural rock formations as might be seen in hot, dry locations around the world as a result of erosion over many millions of years. Not quite buttes, they're more of a set of rocks stacked on top of each other that have resisted further erosion over time.
Creating these kinds of terrain is actually remarkably simple and easy to do. The key ingredients are:
(1) Plentiful styrofoam;
(2) Hot wire cutter;
(4) PVA glue;
(5) MDF base.
Obviously, one doesn't need an MDF base for these items, but I find that it does help preserve the lifetime of the piece. Also obviously, most hobbyists will have paint in their collection. However, I tend to use textured paint for these kinds of projects to try to give a more natural feeling to them. I would certainly recommend that others try them out if they don't already own some. Making your own textured paint can also be achieved through the addition of PVA glue ... but that isn't so kind on your brushes in the long term, so I tend to stick with pre-made and shop-bought textured paint for my projects. Styrofoam packaging is plentiful in this day and age. Just keep some around in your bits box rather than send it to a landfill, and you're sorted.
Perhaps the hardest item to acquire is the hot wire cutter -- I would recommend mail ordering it if you do not live in or near to a major city shopping precinct as they can be tough to casually track down. This is an integral ingredient as it is needed to slice in to the foam and shape it to the desired morphology. To achieve this, I basically rule together cubes of foam on top of each other using PVA glue and base them on the MDF board. I then slice inward and outward at regular intervals to create the rock shapes.
Painting them over with a dark undercoat and then a textured layer of brown works wonders. A brief dry brush with a slightly lighter vanilla colour and the job is done. Total working time is a couple of hours, but I think the results are very nice indeed.
Below is a picture of the desert themed board that I regularly use them on (top right hand corner). I think they fit in very well here. Although they also don't look too out of place on Martian themed boards either.