Saturday, August 18, 2018

Conversion Beamer Lernaean Terminator

Its been a little while due to holidays, but getting back in to the swing of things now. This post is a quick update on the Lernaeans that I got when they were released a month or more ago now. One of the major choices surrounding this unit is whether to assemble them using the included conversion beamer. I know a lot of people will immediately say a big fat "no" to this idea. And to be candid, so did I initially.

However, I did want to see how it looked. Plus I actually wanted to have at least one miniature looking like the canonical Lernaean depicted in the literature and on Forge World's site. For the boxed set though, this means that there will always be left over parts unless I magnetize the parts. Having fiddled around with the arms, I decided against magnets here. Hence I decided to try to hunt down a spare body (etc.) for the remaining volkite arm and stumbled across Egg Head Miniatures in the UK. I snapped up the extra body (plus other bits to make up a sixth terminator) and used it here so that I would not have any bits left unused. Now, I know my readers will say why didn't I just use the conversion beamer on a master of the forge, or similar. And you would be right - it is a more logical and tactical choice. I come back again to the fluff side of things. I'm assembling this Lernaean this was because it is cool looking and canonical. 

Here, I have mounted the terminator on to one of the spare parts from a manufactorum kit I had lying around and decorated it with stones and cork to finish the effect. The terminator is looking down the barrel of the conversion beamer, lining up his next shot. The axe meanwhile is gripped near the top giving the miniature a dynamic pose and synchronising with the stride that he is taking. Overall, a pleasing build to make and a model that I am certainly happy to have in my collection. 

Saturday, July 14, 2018

Wargames Gallery: Salamanders vs Alpha Legion

In position through infiltration, the Alpha Legion assaults from behind cover in to the Salamanders hoping to catch them off-guard in an early spear-tip manoeuvre.


Thursday, July 5, 2018

NOCF

Here at Warpstone Flux, we are supporting the NOVA Open Charitable Foundation. For the duration of the raffle, there will be a banner on the right hand side sidebar to click on and enter the raffle. 

The reasons that we are supporting this are multifold, but they are supporting charities that we personally believe in and have had a positive, and personal, opinion of. 


The charity raffles are now open, and will remain open until 2nd September. There are plenty of high quality prizes for these raffles, including, but not limited to a Warlord Titan, a 30k Iron Warriors complete army, and a 30k World Eaters complete army ... plus plenty more besides (these are simply the ones that drew my eyes immediately!). Check out the link and have a look at the awesome paint jobs -- they are certainly inspiring!

Sunday, July 1, 2018

Alpharius - Finished Model

I finished painting all of the parts and have now pinned and glued them all together. I am delighted by the final result and aesthetic!

The first picture is a front view of the completed model. I am very pleased with the blue to green gradients that I have achieved in the panels of the armour, as well as some of the extreme highlights on the silver parts of the armour.

The second one is a rear view, giving a sense of what I've achieved with the cape. Even though it is not painted with metallic paint, there is a good hint of light and shade on the cape that is reinforced with the stencilling on both the rear and the side facing Alpharius. 


A little nod to the internal Alpha Legion civil war can be seen in the base, especially with the Omega symbol on the decal of the doomed space marine legionary on the ground. 

Total project time was probably about 12 hours, spread over a couple of weeks.

I am going to leave it there for today and let readers just look at the pictures instead of typing too much more. I will aim to take a few more pictures in the coming days under better light and with scenery to show off the model in different compositions. Until then, enjoy! Questions and comments welcome.

Saturday, June 30, 2018

Alpharius Shoulders

The upper shoulder pads are done! The approach here was to have a little experiment with how I am going to attempt the main body and legs of the model. The undercoat is black to provide dark recesses, followed by a base colour of alpha legion blue that I mixed up a little while ago. 

I then applied some subtle layers and inks of blues and greens to give the shoulders and scales a little bit of a gradient. This is tough to pull off since blue and green are a pair of colours that don't exactly complement each other well. However, I think the blend that I have done here is fine. The scales have been picked out with scorpion green on the top.


The silver around the edges is done with iron breaker followed by an inking of Nuln Oil. The highlights are done with rune fang silver followed by extreme highlighting with white. 

However, once I have glued the shoulders in place on the main model, I will return to the extreme highlighting to ensure that the glints are in the correct places. That is hard to do right now with the pieces off the model. 


Thursday, June 28, 2018

Pale Spear Painting

For Alpharius' pale spear, I wanted to at least to try to communicate some of the alien origin of this ghastly weapon. As with most hobbyists, my interpretation of the Pale Spear is that it is Necron in origin. Goodness knows how Alpharius got hold of such a relic, but I guess that's a part of his charm.

Starting with a black undercoat, I sprayed some silver on the the spear to use as a reference point for the azimuthal light. However. Unlike for Alpharius' body, I was not very happy with this approach and thought about using something else. Initially, I wanted to paint the blades of the spear in the same manner as a power weapon. Perhaps blues and lightning dancing across the surface. I abandoned this idea early on as I had labelled it as too Imperial looking. 

Instead, I wanted to try my hand at something a bit different. I elected to give non-metallic metals a whirl. Now, I will be the first to confess that I'm not usually very good with this approach. I am much more comfy with flaming swords or electricity dancing across their surfaces. Hence it represented a bit of a challenge for me. All good!

The image below shows the result.


For the non-metallic metal approach, I have wet blended black to white (through grey) on both sides of tips of the spear. However: the blending is inversed for each side and a delimited of white applied between them. The overall approach is sound, although I think I might re-do this on a different day (with a lower temperature) to get a slightly better result. 

The shaft of the spear meanwhile has been picked out in a mahogany and maroon colour around the grip, with a weathered silver approach for the central parts. The hands of Alpharius follow the colour scheme established on his main body.

Its getting closer to the time to glue all the parts together...!
Related Posts Plugin for WordPress, Blogger...

Facebook

Sequestered Industries