Over the next few posts, I'll be writing up my scratch-built Herald of Tzeentch on a chariot that I built a while back and took to a recent tournament with me. For the chariot of Tzeentch, I wanted to build a convincing looking pink horror being pulled along on a disk by a pair of screamers. To this end, I started to build a base for the herald from scratch.
For the base, I simply used a thick rectangular cut of black plasticard and added a layer of textured (white) plasticard on top. From therein, it was a case of thinking about how the chariot might be constructed. I knew that I wanted to have two screamers on the base, so I thought about some ruins. My previous work with the Hirst Arts range came in handy here: I cast several pillars from their range and added them to three corners of the build. On one of these pillars, I wanted to rest a screamer. On the rear pair (as pictured above), I wanted to (somehow!) rest the disk and herald.
The second screamer was going to be a problem though. In the end, I elected simply to drill in to the plasticard base and insert a flying base stand for the second screamer to rest upon. That way, I could take the screamer off for transport and also use it on a different flying base as an individual screamer as required.
For the rest of the base, I scattered around a large number of debris items and fine, small grit to be suggestive of some ancient temple ruins.
The second picture shows how the screamers fit in with the base in the grand scheme of things. They rest toward the front of the rectangular base, with one balancing on the intact pillar.
In the next part, I'll detail the herald itself and how I solved where it would fit in to the scenic base I'd built. If I'd have been thinking more clearly about this, I might have build the herald FIRST, rather than the scenic base...
For the base, I simply used a thick rectangular cut of black plasticard and added a layer of textured (white) plasticard on top. From therein, it was a case of thinking about how the chariot might be constructed. I knew that I wanted to have two screamers on the base, so I thought about some ruins. My previous work with the Hirst Arts range came in handy here: I cast several pillars from their range and added them to three corners of the build. On one of these pillars, I wanted to rest a screamer. On the rear pair (as pictured above), I wanted to (somehow!) rest the disk and herald. The second screamer was going to be a problem though. In the end, I elected simply to drill in to the plasticard base and insert a flying base stand for the second screamer to rest upon. That way, I could take the screamer off for transport and also use it on a different flying base as an individual screamer as required.
For the rest of the base, I scattered around a large number of debris items and fine, small grit to be suggestive of some ancient temple ruins.
The second picture shows how the screamers fit in with the base in the grand scheme of things. They rest toward the front of the rectangular base, with one balancing on the intact pillar. In the next part, I'll detail the herald itself and how I solved where it would fit in to the scenic base I'd built. If I'd have been thinking more clearly about this, I might have build the herald FIRST, rather than the scenic base...
2 comments:
Nice idea Kevin. It will be interesting to see how this turns out.
This is looking very cool.
Post a Comment